Page 1
- for a smar te r work forc e PROGLOVE QUICKSTART GUIDE SCANNER MARK DISPLAY MARK 2 MARK 2 MARK BASIC CONNECTIVTIY DEVICE CHARGING STATION (OPTIONAL) ACCESS POINT GATEWAY CHARGING STATION 10-SLOT CHARGING STATION WEARABLES INDEX TRIGGER REEL Standard size...
Page 2
QUICKSTART GUIDE NOTE The following describes how to use the scanner with an Index Trigger. INSERT ACTIVATE Insert the scanner in the Index Trigger. Press the textile trigger on the Index Trigger for about 2 seconds to activate the scanner. CONNECT WITH PAIRING BARCODE: 4 OPTIONS VIA PG INSIGHT MOBILE VIA BLE HID...
Page 3
NOTE ATTENTION The following describes how to use the scanner with a Reel. INSERT ACTIVATE Insert scanner into the Reel. Pull the module clip forward to activate the scanner. CONNECT WITH PAIRING BARCODE SCAN VIA PG INSIGHT MOBILE / BLE HID / GATEWAY / ACCESS POINT Pull the module clip forward.
Page 4
FAQs, 2. Hold the trigger pressed for about 15 seconds Video Tutorials and much more: 3. Release the trigger. Press the trigger again for about 2 seconds to reactivate the scanner. proglove com/support NEED HELP? STANDARD SETTINGS:...
Need help?
Do you have a question about the MARK DISPLAY and is the answer not in the manual?
Questions and answers