Device Settings; Configuration Barcodes; Standard Settings; Mark - ProGlove Mark 2 User Manual

4 STEP: DEVICE SETTINGS
TH
The device settings can be used to make the settings for
the Access Point One S
(e.g. keyboard layout)
as well as settings about feed-
(USB HID or USB CDC mode)
back profiles and optimizations of the scan engine.
APPLICATION EXAMPLE:
Change the baud rate for a connection with a RS232 cable:
1. Click in the field "RS232 baud rate – 115,200"
2nd Select the appropriate baud rate.
5 STEP: CONFIGURATION BARCODES
TH
Configuration of MARK 2 and Access Point One S with new
settings.
Use MARK 2 to scan the configuration barcodes.


STANDARD SETTINGS:

The standard settings are activated as a default setting. They are defined as
follows:
, output mode
BARCODE
SETTINGS
DATA FORMATTING -
PREFIX AND SUFFIX
DATA FORMATTING -
ADVANCED FORMATTING

DEVICE SETTINGS

868/915 MHZ BLE HID
All barcode types are activated.
Inverse barcode types are disabled.
"ENTER" is activated as a suffix
No rules are Not available
activated
USB-HID output Keyboard layout
mode German
All feedback functions
Keyboard layout
German , are enabled, no engine
(DE)
All feedback settings are enabled
functions are
enabled,
no engine set-
tings are enabled
,
(DE)
31