Mhz - Data Transfer - ProGlove Mark 2 User Manual

868/915 MHZ - DATA TRANSFER

PROBLEM
Barcode data is not transferred.
Different barcode data is
transferred.
CAUSE
MARK 2 is not connected to the Access
Point One S.
MARK 2 is out of range of the Access
Point One Ss One S.
(maximum range is < 98ft.)
Access Point One S is defective.
MARK 2 is defective.
The keyboard layout of the end device is
set with a different language.
SOLUTION
Scan the pairing barcode on the

Access Point One S.
Bring MARK 2 closer to Access Point

One S.
Access Point One S must be replaced.
More detailed information can be

found at
proglove.com/support
MARK 2 must be replaced.
More detailed information can be

found at
proglove.com/support
Adjust the keyboard layout of the

configuration tool to the keyboard layout
of the end device. In the configuration
tool under "Device
(config.proglove.de)
settings - USB keyboard layout," adjust
the language.
868
(915)
MHz
.
.
37