Troubleshooting - ProGlove Mark 2 User Manual

TROUBLESHOOTING

MARK 2
PROBLEM
MARK 2 is not responding.
MARK 2 is not vibrating or does not
beep after successful data transfer.
The battery symbol of MARK 2 flashes
red.
CAUSE
Battery is not charged.
Glove is defective.
Feedback signals are disabled.
The battery charge is low.
SOLUTION
Charge MARK 2 in the Charging Station S

for at least 20 min.
Change glove.

Check whether the feedback signals in the

configuration tool
(config.proglove.de)
enabled under "Feedback Profiles."
Charge MARK 2 in the Charging Station S

for at least 20 min.
are
35