Table of Contents
Advertisement
Fast CPC: Safety and Handling Procedures
Safety and Handling Procedures
Read this section to learn safe handling procedures for the Fast CPC.
There are limited user-serviceable parts inside the Fast CPC: all repair and
maintenance must be performed by a qualified service technician.
When working with the Fast CPC:
▪
Do not remove any parts from the instrument unless this manual tells
you to do so.
▪
Do not remove the instrument housing or covers while power is supplied
to the instrument.
Safety Signals
The following warning symbols and labels are used in the documentation
and on the Fast CPC. Follow the procedures described in this manual to use
the instrument safely.
Warning
Warnings are used for the following purposes:
▪
To indicate that unsafe use of the instrument could result in serious injury
to you or cause irrevocable damage to the instrument.
▪
To indicate that if you do not follow the procedures described in this
manual, you may damage the instrument.
▪
To draw attention to important information about the operation and
maintenance of the Fast CPC.
High Voltage Sticker
A High Voltage warning sticker attached to the Fast CPC warns you that un-
insulated voltage within the instrument may be sufficient to give you an
electric shock. Do not make contact with any part inside the instrument.
Grounding Connection Sticker
A Grounding Connection sticker attached to the Fast CPC indicates that the
nebulizer is connected to earth ground and cabinet ground.
Class I Laser Sticker
When operated according to the manufacturer's instructions, the Fast CPC is
a Class I laser product as defined by U.S. Department of Health and Human
Services standards under the Radiation Control for Health and Safety Act of
Fast CPC User Manual
2
Version 1.2
Advertisement
Table of Contents
