Fast Condensation Particle Counter Model 3650: Installation
Follow these instructions to connect the Fast CPC to an Annular Flow Ion
Mobility Classifier using the high-performance aerosol inlet:
1. Loosen and then remove the stainless steel nut on the Aerosol In
Nut on
Aerosol In
fitting
Aerosol Inlet
tube
2. Pull the Aerosol Inlet tube forward.
3. Loosen the nut on the stainless steel elbow joint on the high-
Nut
4. Remove the elbow joint fitting. Save the joint and all its component
Fast CPC User Manual
fitting.
performance aerosol inlet on the base of the Fast CPC.
parts for reuse. (Do not lose the O ring.)
11
High-
performance
aerosol inlet
|
Elbow joint
Version 1.2