NFC module
Table 6-10
NFC module description and part number
Description
NFC module (includes antenna and touchpad foam)
Before removing the NFC module, follow these steps:
1.
Prepare the computer for disassembly
2.
Disconnect all external devices from the computer.
3.
Remove the bottom cover (see
4.
Remove the battery (see
Remove the NFC module:
1.
Disconnect the system board cable (1) and the NFC antenna (2) from the ZIF connectors on the NFC
module.
2.
Use a tool to release the NFC module from the adhesive securing it to the computer (3), and then remove
the module from the computer (4).
Reverse the removal procedures to install the NFC module.
62
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page
49).
37).
37).
Spare part number
L14385-001