Fingerprint Reader Assembly - HP EliteBook 840 G6 Maintenance And Service Manual

Fingerprint reader assembly

Table 6-14 Fingerprint reader and bracket descriptions and part numbers
Description
Fingerprint reader assembly (includes cable)
Fingerprint reader bracket (included in Bracket Kit)
Before removing the fingerprint reader assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the system board (see
Remove the fingerprint reader assembly:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the fingerprint reader bracket to the computer.
2. Lift the bracket from the fingerprint reader assembly (2).
3. Use a tool to pry the fingerprint reader board free from the computer (3), and then remove the assembly
from the computer (4).
Reverse this procedure to install the fingerprint reader assembly.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 49).
System board on page
37).
37).
66).
Component replacement procedures
Spare part number
L62741-001
L62737-001
69