Rj-45 Board With Bracket - HP EliteBook 840 G6 Maintenance And Service Manual

RJ-45 board with bracket

Table 6-5 RJ-45 board with bracket description and part number
Description
RJ-45 board with bracket
Before removing the RJ-45 board and bracket, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the RJ-45 board and bracket:
1. Remove the six Phillips M2.5 × 5.0 screws (1) that secure the assembly to the computer.
2. Rotate the assembly out of the computer (2).
Reverse this procedure to install the RJ-45 assembly.
56 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page 37).
37).
Battery on page 49).
Spare part number
L14386-001