While Servicing; After Servicing - Samsung DW80M9 Series Service Manual

Check if the power cable is damaged, flattened, cut or otherwise degraded.
ࣃ
- If faulty, replace it immediately. Failure to do so may result in electric shock or fire.
Completely remove any dust or foreign material from the housing, wiring and connection parts.
ࣃ
- This will prevent a risk of fire due to arcing and short circuits in advance.
When connecting wires, make sure to connect them using the correct connectors and check that they are
ࣃ
completely connected.
- If tape is used instead of the connectors, it may cause fire due to arcing.
Make sure to disconnect the PBA power terminals before starting the service.
ࣃ
- Failing to do so may result in a high voltage electric shock.
Check for any water leakage.
ࣃ
- Perform a test using the standard(normal) cycle and check whether there is any water leakage through the floor
section or the pipes.
Do not allow consumers to repair or service any part of the dishwasher themselves.
ࣃ
- This may result in personal injury and shorten the product life.
If it seems that grounding is needed due to water or moisture, make sure to run grounding wires.
ࣃ
- Failure to do so may result in electric shock due to electric leakage.
2 _ Safety Instructions

While Servicing

After Servicing