Disassembly And Reassembly; Tools For Removal And Reassembly; Preparation For Parts Replacement - Samsung DW80M9 Series Service Manual

3. DISASSEMBLY AND REASSEMBLY

3-1. TOOLS FOR REMOVAL AND REASSEMBLY

Tool image
No.
Adjustable Wrench
Open-end Wrench
Vice pliers
Others
(screwdriver, nipper, long nose pliers)
Nut Driver

* Preparation for parts replacement

1. Take out the residual water inside the product.
(Drain the water by operating the drain pump)
2. Close the water supply valve.
3. Turn off the power & disconnect power cable.
You must turn off the circuit breaker connected to the product.
4. Pull out the unit from the sink and lay it on the floor.
Be careful of the drain hose when pulling out the unit.
Caution
When pulling out or laying the dishwasher down for service, it may be necessary to lower the height of the adjustable
legs to provide the clearance for the removal of the unit, prevent breaking the legs, or damaging the base of the unit.
Tool Type
1-7/16"
10mm
Remarks
Leg
Common tools for servicing
Screwdriver - Philips, flat, Torx T20, Small flat
Heater bracket Nut
Disassembly and Reassembly _ 9