Samsung DW80M9 Series Service Manual page 34

Part
Assy sump
32 _ Disassembly and Reassembly
Figure
Preparation:
▪ Remove the Assy cover base.
▪ Remove the case gear.
▪ Remove the Circulation pump.
▪ Remove the Drain pump.
1. Release Clamp.
2. Remove the flat filter.
3. Remove the four (4) Screws.
Description
- Refer to the "Assy cover base" disassembly section
to separate Assy cover base until step 2.
- Refer to the "Case gear etc" disassembly section to
separate Assy cover base until step 3.
- Refer to the "Circulation pump" disassembly
section to separate Assy cover base until step 7.
- Refer to the "Drain pump" disassembly section to
separate Assy cover base until step 4.
Caution
Remove all water from the sump assembly before
removing the pump. Failure to do so will cause the
water to be released onto the floor. Make sure to use
a towel to cover the PBA Case & Electric parts to
prevent water damage to these parts.