Part
Assy Base
30 _ Disassembly and Reassembly
Figure
Preparation:
•
1. Remove the two(2) screws on the plate base both-
2. Carefully lay the dishwasher down on its back.
3. Remove the cover assy-cover pcb and assy-cover
4. Disconnect the wire connectors from Assy Sump.
5. Pull out the plate base slightly.
6. Remove other parts as needed to remove the base.
Ex . Frame front, Cover harness etc.
Description
Disassemble the housing L/R and assy-case brake.
- Refer to each disassembly section.
sides. (in Red circle)
pcb-inverter and disconnect the wire connectors.