Samsung DW80M9 Series Service Manual page 16

Part
Dispenser - slide
Assy Module
(Pocket Light
Module)
14 _ Disassembly and Reassembly
Figure
Preparation:
•
1. Remove the two(2) connectors from the dispenser.
2. The dispenser-slide is fixed to the door inner with
3. Push it to the inside carefully.
Preparation:
•
1. Remove Two (2) Screws which pointed by red
2. Disassemble Holder display PCB from Assy panel
Description
Disassemble the door outer.
- Refer to the "door outer" disassembly section to
separate the door outer.
Caution
Be careful not to break them during disassembly.
several tabs. Use a flat tip screwdriver to gently pry
the tabs.
Be careful as the tub front is sharp.
Disassemble the Panel control.
- Refer to the "Panel control" disassembly section to
separate Panel control until step 1.
arrows from Assy window panel.
control.