Table of Contents
Advertisement
Note
Place the head cleaning sheet in the paper tray
according to the instruction described on the head
cleaning sheet.
Head cleaning sheet
(Place this side up when loading.)
Paper fed direction
3
Press the MENU button.
4
Display the CLEANING item on the printer
window display by pressing the F or f button.
5
Press the EXEC button.
Cleaning is started. When cleaning has been
completed, the head cleaning sheet is ejected.
The printer returns to standby status.
Hole
Paper tray
6
Remove the paper tray again. Remove the head
cleaning sheet and place the roller cleaning sheet in
the paper tray, and re-insert the paper tray.
Note
Place the roller cleaning sheet in the paper tray,
following the instruction described on the roller
cleaning sheet.
Roller cleaning sheet
(Place this side up when loading.)
Hole
Paper fed direction
7
Repeat steps 3, 4 and 5 to clean the roller.
8
Remove the roller cleaning sheet. Re-load the paper
removed in step 1 and re-insert the paper tray.
To clean the thermal head
If the printout quality deteriorates, for example, when
white strips still appear on the printouts, even after you
have cleaned the thermal head and roller using the
cleaning sheets, you should clean the thermal head using
the thermal head cleaning kit (supplied).
For detailed information on how to use the thermal head
cleaning kit, refer to the operating instructions supplied
with the thermal head cleaning kit.
1
Press the G, g, and EXEC buttons simultaneously.
The thermal head is released.
2
Press the POWER switch to turn off the printer.
3
Remove the screw from the maintenance door
located on the left side panel and open the door.
Paper tray
17
Precautions
Advertisement
Table of Contents
