Connector Assignment - MICRO-EPSILON colorSENSOR OT Series Instruction Manual

colorSENSOR OT-3
Series

Connector Assignment

Connection to PLC:
8-pole fem. connector Binder Series 712
Pin: Color: Assignment:
1 white GND (0V)
2 brown +24VDC (±10%)
3 green IN0
4 yellow OUT0
5 grey OUT1
6 pink OUT2
7 blue OUT3
8 red OUT4
Connecting cable:
CAB-M9-8P-St-ge; 2m-PUR; open
CAB-M9-8P-St-ge; 5m-PUR; open
(Standard length 2 m)
Connection to PC:
4-pole fem. connector Binder Series 707
Pin: Assignment:
1 +24VDC (+Ub, OUT)
2 GND (0V)
3 RxD
4 TxD
Connecting cable:
CAB-M5-4P-St-ge; 2m-PUR; RS232
CAB-M5-4P-St-ge; 5m-PUR; RS232
(Standard length 2 m)
alternatively:
Connecting cable (incl. driver software):
CAB-M5-4P-St-ge; 2m-PVC; USB
CAB-M5-4P-St-ge; 5m-PVC; USB
(Standard length 2 m)
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101 · 73037 Göppingen / Germany
Tel. +49 (0) 7161 / 98872-300 · Fax +-49 (0) 7161 / 98872-303
eltrotec@micro-epsilon.de ·
True Color Sensors
•
Connecting cable to PLC:
CAB-M9-8P-St-ge; xm-PUR;
open
www.micro-epsilon.com
colorSENSOR OT-3-HR-50
Instruction Manual
Connecting cable to PC (RS232 interface):
CAB-M5-4P-St-ge; xm-PUR; RS232
Connecting cable to PC (USB interface):
CAB-M5-4P-St-ge; xm-PVC; USB
(incl. driver software)
Page 4