Processor And Memory - Motorola MVME162P-344 Series Installation And Use Manual

Functional Description
Feature
Switches
Status LEDs
4
Timers
Interrupts
VME I/O
Serial I/O
Ethernet I/O
IP interface
SCSI I/O
VMEbus interface

Processor and Memory

4-2
Table 4-1. MVME162P4 Features (Continued)
and
RESET ABORT
Eight: Board Fail (FAIL)
Controller ( ), LAN Activity
SCON
Activity , VME Activity
(SCSI)
Four 32-bit tick timers and watchdog timer in Petra ASIC
Two 32-bit tick timers and watchdog timer in VMEchip2 ASIC
Eight software interrupts (on versions with VMEchip2 ASIC)
VMEbus P2 connector
Two EIA-232-D, EIA-530, EIA-422, or EIA-425 configurable serial ports
via front panel and transition module
Optional Ethernet transceiver interface via DB15 connector on transition
module
Four IndustryPack interface channels via 3M connectors behind front panel
Optional SCSI interface with DMA via P2 or LCP2 adapter board
VMEbus system controller functions
VMEbus-to-local-bus interface (A24/A32, D8/D16/D32/block transfer
[D8/D16/D32/D64])
Local-bus-to-VMEbus interface (A16/A24/A32, D8/D16/D32)
VMEbus interrupter
VMEbus interrupt handler
Global Control/Status Register (GCSR) for interprocessor communications
DMA for fast local memory/VMEbus transfers (A16/A24/A32,
D16/D32/D64)
The MVME162P4 is based on the MC68040/MC68LC040
microprocessor. The boards are built with 16MB or 32MB synchronous
DRAM (SDRAM). Various versions of the MVME162P4 may have the
SDRAM configured to model 1MB, 4MB, 8MB, or 16MB of parity-
protected DRAM or 4MB, 8MB, 16MB, or 32MB of ECC-protected
DRAM.
Description
switches on front panel
, CPU Status (STAT) , CPU Activity
, Fuse Status (
(LAN)
(VME)
Computer Group Literature Center Web Site
(RUN) , System
), SCSI
FUSE