Connecting The Device; Notes On Connecting; Connecting The Function Earth - Siemens Simatic IPC527G Operating Instructions Manual

3.3

Connecting the device

3.3.1

Notes on connecting

Risk of fire and electric shock
The on/off switch does not isolate the device from the power supply. Risk of electric shock if
the device is opened incorrectly or defective. There is also a risk of fire if the device or
connecting lines are damaged. Death or serious bodily injury can result.
You should therefore protect the device as follows:
• Always pull out the power plug when you are not using the device or if the device is
• Use a central power isolating switch for cabinet installation.
Risk of lightning strikes
A lightning flash may enter the mains cables and data transmission cables and jump to a
person.
Death, serious injury and burns can be caused by lightning.
Take the following precautions:
• Disconnect the device from the power supply in good time when a thunderstorm is
• Do not touch mains cables and data transmission cables during a thunderstorm.
• Keep a sufficient distance from electric cables, distributors, systems, etc.
3.3.2

Connecting the function earth

A connected function earth discharges electrical charges from the metal enclosure.
The function earth also improves the discharge of interference generated by external power
cables, signal cables or cables for I/O modules to ground.
The connection for the function earth is labeled with the following symbol:
SIMATIC IPC527G
Operating Instructions, 03/2019, A5E45491226-AA
WARNING
defective. The power plug must be freely accessible.
WARNING
approaching.
Installing and connecting the device
3.3 Connecting the device
27