Internal Interfaces; Overview Of Internal Interfaces - Siemens Simatic IPC527G Operating Instructions Manual

Technical specifications
7.5 Hardware descriptions
Procedure
1. Navigate to the root directory of the DIO Setting tool as the Administrator user in the
command prompt window.
2. Enter the following commands to modify the registers:
– Set the specified General Purpose Input Output (GPIO):
– Show the specified GPIO:
– Show GPIO40-47:
3. According to the return value to determine whether the modification is succeed in the
command prompt window:
– 255: the modification fails.
– Others: the modification succeeds.
7.5.3

Internal interfaces

7.5.3.1

Overview of internal interfaces

Interface
M.2
72
GpioSetting [Parameter1] [Parameter2] [Parameter3](Optional)
Parameter Value
number
1 GPIO number
2 Mode
3 Status
For example, Show GPIO47
GpioSetting
Position Connector
Internal SATA 3.0
M.2 2242 Key B (SATA)
Description
Range: to
GPIO40 GPIO47
O: Output
•
I: Input
•
H: High
•
L: Low
•
GpioSetting [Parameter1] /S
: GpioSetting GPIO47 /S
/ALL
Operating Instructions, 03/2019, A5E45491226-AA
Example
Set GPIO47 to Output High:
GpioSetting GPIO47
Set GPIO47 to Output Low:
GpioSetting GPIO47
Set GPIO47 to Input:
GpioSetting GPIO47
Description
SATA
SIMATIC IPC527G
O H
O L
I