Riser Card - Siemens Simatic IPC527G Operating Instructions Manual

Expanding and assigning parameters to the device

5.3 Riser card

5.3 Riser card
The riser card contains the following slots:
● 1 PCIe ×1 slot
● 2 PCI slot
Requirement
● The device is opened.
● Disconnect all the cables on the motherboard.
● A T10 screwdriver
Procedure - Installing the riser card
Procedure - Removing the riser card
Follow the above steps in reverse order to remove the riser card.
40
Align the golden finger on the riser card with the
PCIe x 4 slot on your motherboard, and then press
firmly until the riser card is completely seated on the
slot.
Secure the riser card to the chassis with marked
screws.
Operating Instructions, 03/2019, A5E45491226-AA
SIMATIC IPC527G