Requirements For The Set-Up Location; Connecting The Power Supply - Silvercrest SRWK 800 A1 Operating Instructions Manual

Requirements for the set-up location

For safe and trouble-free operation of the device, the set-up location
must fulfil the following requirements:
■ Place the device on a firm, flat and level surface .
■ Position the device so that the speaker
■ Do not operate the device in a hot or very wet environment or
in the vicinity of combustible materials .
■ The mains socket must be easily accessible so that the plug can
be easily pulled out in an emergency .

Connecting the power supply

CAUTION
► Before connecting the device, compare the connection data
(voltage and frequency) on the rating plate on the rear of the
device with that of your electric supply . This data must agree so
that the device is not damaged .
♦ Connect the mains cable
in standby mode .
SRWK 800 A1
0
to a mains socket . The device is now
q
is not covered .
GB │ IE │ NI │ 13 ■