Electrical Data For Inputs And Outputs; Input - Resistance Thermometer / Resistances; Input - Thermocouples / Voltages - ABB TTH200 Operating Instruction

18 TTH200 HEAD-MOUNT TEMPERATURE TRANSMITTER | OI/TTH200-EN REV. B
... 8 Electrical connections

Electrical data for inputs and outputs

Input - resistance thermometer / resistances

Resistance thermometer
• Pt100 in accordance with IEC 60751, JIS C1604, MIL-T-24388
• Ni in accordance with DIN 43760
• Cu in accordance with recommendation OIML R 84
Resistance measurement
• 0 to 500 Ω
• 0 to 5000 Ω
Sensor connection type
Two-, three-, four-wire circuit
Connection lead
• Maximum sensor line resistance
per line 50 Ω in accordance with NE 89
• Three-wire circuit:
Symmetrical sensor line resistances
• Two-wire circuit:
Compensation up to 100 Ω total lead resistance
Measurement current
< 300 μA
Sensor short circuit
< 5 Ω (for resistance thermometer)
Sensor wire break
• Measuring range: 0 to 500 Ω > 0.6 to 10 kΩ
• Measuring range: 0 to 5 Ω > 5.3 to 10 kΩ
Corrosion detection in accordance with NE 89
• Three-wire resistance measurement > 50 Ω
• Four-wire resistance measurement > 50 Ω
Sensor error signaling
• Resistance thermometer:
Sensor short circuit and sensor wire break
• Linear resistance measurement:
Sensor wire break

Input - thermocouples / voltages

Types
B, E, J, K, N, R, S, T in accordance with IEC 60584
•
• U, L in accordance with DIN 43710
• C, D in accordance with ASTM E-988
Voltages
• −125 to 125 mV
• −125 to 1100 mV
Connection lead
• Maximum sensor line resistance:
per line 1.5 kΩ, total 3 kΩ
Sensor wire break monitoring in accordance with NE 89
• Pulsed with 1 µA outside measurement interval
• Thermocouple measurement 5.3 to 10 kΩ
• Voltage measurement 5.3 to 10 kΩ
Input resistance
> 10 MΩ
Internal reference junction Pt1000, IEC 60751 Cl. B
(no additional jumpers necessary)
Sensor error signaling
• Thermocouple:
Sensor wire break
• Linear voltage measurement:
Sensor wire break