Horizon Fitness PC-P430 Manual page 37

(Continued)
5 Disconnect the connectors of S07/S10
Safety Cover switches.
(Fig.5)
6 Remove the body of the Key switch.
1
. Press the white part on the body and pull out the body.
2
. Put the removed body under the front table through the
square window below the Key switch.
7 Disconnect the connectors of S05/S06
Right and Left Cutting buttons.
8 Remove the whole front table.
• There are eight mounting screws.
3
Descriptions of Mechanisms
Safety Cover
Switch (Left)
(Fig.6)
(Fig.7)
(Fig.8)
Fig.5 Disconnecting the connectors of safety cover switches
S00
Key Switch
Fig.6 Removing the body of the Key switch
Safety Cover
Switch (Right)
S10 S07
404018
3_5_1E
Fig.7 Disconnecting the connectors of the Cutting buttons
Remove the Key
switch body and
pass the body
through the square
window.
404018
3_5_1F
Removing the Front Table
S05
Left Cutting
Button
S06
Right Cutting
Button
Disconnect the connec-
tors for these cutting
buttons.
404018
3_5_1G
Front Table Unit
Fig.8 Removing the front table
404018
3_5_1H
PC-P430
37