Adjustments - Toro Groundsmaster 3280-D Service Manual

Adjustments

Traction Neutral Sensor (Machine Serial Number above 316000000)
Adjusting the Traction Neutral Sensor
Groundsmaster ® 3280-D/3320
05138SL Rev B
g226812
1. Traction neutral sensor
2. Sensor bracket
The traction neutral sensor is a normally open proximity sensor that closes when
the traction pedal is in the neutral position. The sensor is located under the seat
and mounted to a sensor bracket over the hydraulic pump
sensing plate for the traction neutral sensor is the neutral arm.
1. Before adjusting the traction neutral sensor, check and adjust the traction
drive for neutral; refer to Adjusting the Traction Drive for Neutral in the
Traction Unit Operator's Manual.
g226813
1. Traction neutral sensor
2. When the traction pedal is in the neutral position, the gap between the
traction neutral sensor and the neutral arm should be 3.2 to 3.8 mm (0.125
to 0.15 inch) (Figure
Figure 115
3. Neutral arm
4. Jam nut (2 each)
Figure 116
2. Sensor bracket
116).
Page 6–17
5. Lock washer (2 each)
(Figure 115). The
3. Neutral arm
Electrical System: Adjustments