Toro Groundsmaster 3280-D Service Manual page 407

Removing the Differential Gear Assembly (4-Wheel Drive Axle) (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
g226494
1. Spring pin
6. Drive the spring pin from the differential case with a punch and hammer.
Discard the spring pin
Note: Mark and arrange all components so that they can be assembled in
their original position.
g226495
1. Differential pinion shaft
2. Pinion washer (2 each)
3. Pinion gear (2 each)
7. Remove the differential pinion shaft, pinion gears and pinion washers.
Remove the differential side gears and side gear shims. Remove the ring
gear only if it will be replaced
Note: Replacement ring gears are only available in matched ring and pinion
sets.
Figure 276
2. Differential case
(Figure 276).
Figure 277
4. Side gear (2 each)
5. Side gear shims
6. Ring gear
(Figure 277).
Page 8–65
7. Differential case
Drive Axles: Service and Repairs