Toro Groundsmaster 3280-D Service Manual page 77

Removing the Engine (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
g221629
1. Hose clamp
2. Flat washer (8 each)
3. Bolt (4 each)
4. Reservoir hose
7. Loosen the hose clamp and remove the reservoir hose from the radiator fill
opening (Figure 29), and remove the coolant reservoir assembly from the
radiator fan shroud.
8. Remove the 4 fasteners, 6 flat washers, and 4 locknuts that secure the fan
shroud to the radiator
radiator.
9. Remove the PTO shaft from the machine; refer to
(page 9–8).
10. Remove the exhaust muffler from the engine; refer to
4–9).
11. Remove the air cleaner assembly from the machine; refer to
System (page 4–7).
Figure 29
5. Coolant reservoir
assembly
6. Locknut (6 each)
7. Fan shroud
8. Carriage bolt (2 each)
(Figure 29). Position the fan shroud away from the
Page 4–21
9. Upper radiator hose
10. Hose clamp (4 each)
11. Lower radiator hose
12. Radiator
Removing the PTO Shaft
Exhaust System (page
Air Cleaner
Diesel Engine: Service and Repairs