Gearbox - Toro Groundsmaster 3280-D Service Manual

Gearbox

g223994
1. Mount (4 each)
2. Lock washer (4 each)
3. Bolt (4 each)
4. Flange nut (4 each)
5. Washer (4 each)
Removing the Gearbox
Cutting Units: Service and Repairs
6. Right gearbox bracket
7. Gearbox
8. Left gearbox bracket
9. Woodruff key
10. Drive pulley
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Remove the belt covers from the top of the cutting deck. Remove the drive
belt from the deck pulleys; refer to the Cutting Unit Operator's Manual
Figure 303
11.
12.
13.
14.
Page 10–14
Taper lock bushing
Set screw (2 each)
Carriage screw (4 each)
Cutting deck
Groundsmaster ® 3280-D/3320
05138SL Rev B