Elcometer 2250 Operating Instructions Manual page 11

8. Press [ENTER] to confirm your selection.
The instrument displays the time/date setup screen:
9. If necessary, press [UP] or [DOWN] to select the time/date mode: EU mode (European mode:
day-month-year) or US mode (month-day-year).
10. Press [ENTER] to confirm your selection.
The instrument displays the set clock screen:
The day of the week flashes.
11. If necessary, press [UP] or [DOWN] to change the day of the week.
12. Press [ENTER] to confirm your selection.
The first digit of the date flashes.
13. If necessary, press [UP] or [DOWN] to change the digit.
14. Press [ENTER] to confirm your selection.
15. Continue adjusting values and confirming with [ENTER] until all date and time values are
correct.
The instrument displays the welcome message again and immediately afterwards the working
mode selection screen:
Your Elcometer Krebs Viscometer is now configured and ready to take measurements in automatic
mode (page 12) or in manual mode (page 14).
TIME/DATE
EU mode
Set Clock EU mode
Tuesday
15-11-05
11:14:05
2250 KV 1.1
<START> automatic
<ENTER> manual
XX:XX:XX
(day)
(ddmmyy)
(hhmmss)
R
11