RAW WATER DISCHARGE HOSE
[When a siphon break is not required)
RAW WATER TO EXHAUST
DISCHARGE HOSE
[OWNER INSTALLED}
RAISE THE HOSE ABOVE THE
LEVEL OF THE MANIFOLD IN
A GENTLE LOOP DOWN
ro,
THE EXHAUST ELBOW
WIRE TIE TO HOSE
HEAT EXCHANGER
WHEN A SYPHON BREAK IS NOT REQUIRED
WESTERBEKE recommends that the hose
(installi!r supplied) discharging raw water from
the heat exchanger to the water injected exhaust
elbow be looped above and down to the inlet
fitting on· the elbow. The hose can be secured by
a plastic ·wire
tie
as Illustrated.
51