Raw Water Discharge Hose - Westerbeke 8.0KW - 60Hz EDT Operator's Manual

RAW WATER DISCHARGE HOSE
[When a siphon break is not required]
RAISE THE HOSE ABOVE THE
LEVEL OF THE MANIFOLD IN
A GENTLE LOOP OOWN
THE EXHAUST ELBOW
WIRETIETO
HEAT EXCHANGER
RAW WATER TO EXHAUST
DISCHARGE HOSE
IOWNER INSTALLED]
WHEN A SYPHON BREAK IS NOT REQUIRED
WESTERBEKE recommends that the hose
(installer supplied) discharging raw water from
the heat exchanger to the water injected exhaust
elbow be looped above and down to the Inlet
fitting on the elbow. The hose can be secured bV
a plastic wire tie as illustrated.
~
WESTERBEKE
_
g'!fl~~es
&.
G~l1.erators
56
/ ••• "." INJECTED
EXHAUST ELBOW
EXHAUST