Create And Edit Methods - GE AKTAavant Getting Started

6.1.1 Create and edit methods

Introduction
Method creation in UNICORN 6 is performed in the Method Editor module. Predefined
methods are available for a number of different chromatography techniques, for example
affinity chromatography and gel filtration. There are also predefined methods for column
preparation and system cleaning. A method is comprised of a number of phases. Each
phase represents a major process step in the method, for example, equilibration or
elution. If desired, a predefined method can be edited by adding, deleting and/or
rearranging phases, and also by editing the settings of each phase included in the
method.
Illustration of the Method Editor
user interface
The illustration and table below shows the Method Editor module and its panes.
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB
1 2
4
6 Create a method
6.1 Guide to method creation
6.1.1 Create and edit methods
3
57