System Control Module - GE AKTAavant Getting Started

4.3.2 System Control module

Introduction
The System Control module is used to start, view, and control a method run.
System Control panes
As illustrated below, four panes show in the System Control by default. The Run Data
pane (1) presents current data in numerical values, while the Chromatogram pane (2)
illustrates data as curves during the entire method run. Information about the method
progression is presented in the Run Log (3) and the current flow path is illustrated in the
Flow Scheme (4).
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB
4 The instrument and the software
1
2
3
4.3 UNICORN software modules
4.3.2 System Control module
4
43