Back Panel View; Back Panel Ports; Dmx Polarity - Chauvet DJ Obey 40 D-Fi 2.4 User Manual

Back Panel
View

Back Panel Ports

Port
MIDI Control In
DMX Polarity Switch
Strobe Control Out
Fog Control Out
Power On/Off switch Toggle switch that turns the Obey™ 40 D-Fi™ 2.4 on and off.
DMX Control Out
Power DC In

DMX Polarity

Page 18 of 176
MIDI Control
DMX Polarity
In
Switch
DMX Control Out
5-pin MIDI port for connecting to a MIDI board.
Toggle switch for changing DMX polarity.
¼-inch mono port for connecting to one or more strobes in a daisy chain.
5-pin DIM port for connecting to one or more fog machines.
3-pin DMX port for connecting to the products.
External PSU port that connects to the power source.
All Chauvet lights use a negative pin 2 and positive pin 3, so the polarity switch should be set as
shown above and in

Back Panel View

products might be different. See the individual product's User Manual for specific information
For more information about DMX, download the DMX Primer from www.chauvetlghting.com.
Strobe Control Out
DC Power In
Function
(towards the DMX Control Out port). Other manufacture's
Fog Control Out
Power Switch
Obey™ 40 D-Fi 2.4 User Manual Rev. 2