Dmx Cabling; Dmx Cabling Diagram; D-Fi™ Communication; D-Fi™ Diagram - Chauvet DJ Obey 40 D-Fi 2.4 User Manual

DMX Cabling

DMX Cabling
Diagram
D-Fi™
Communication
D-Fi™ Diagram
Page 22 of 176
DMX cabling can be used along with D-Fi™ transmission, or instead of D-Fi™ transmission, for
products that are not D-Fi™ compatible. To use DMX cabling connect the DMX cable from DMX Out
of the board to DMX In of the first product in the rig.
Then connect another DMX cable from DMX Out of the first product in the rig to DMX In of the next
product.
Continue connecting until all the products are connected.
DMX DMX
In Out
1st Product
D-Fi™ communication can be used alone, or incombination with DMX cabling. Products that are
D-Fi™ compatible receive D-Fi™ signal directly from the Obey™ 40 D-Fi 2.4, and products that
require DMX cabling can be connected to D-Fi™ distribution products, such as D-Fi™ Hub and
D-Fi™ Stream 6 which receive the D-Fi™ signal and send it out via DMX cables.
Products that require DMX cables can also be connected directly to the Obey™ 40 D-Fi 2.4 as
shown above in DMX Cabling
D-Fi™ Compatible
Products
Obey™ 40 D-Fi 2.4
DMX DMX
In Out
2nd Product
Diagram.
DMX DMX
In Out
3rd Product
Products Requiring
DMX Cables
Distribution
Obey™ 40 D-Fi 2.4 User Manual Rev. 2
Additional
Products
D-Fi™
Product