Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Obsession are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. Page 2 of 18 Obsession User Manual Rev. 1...
Mounting bracket Bracket adjustment knobs (2x) Infrared sensor Power in/out Display screen 3-pin DMX in/out Menu buttons Product Dimensions 12.6 in 320 mm 8.6 in 210 mm 8.6 in 210 mm Obsession User Manual Rev. 1 Page 3 of 18...
2nd product products • It is possible to link up to 8 Obsession products on 120 VAC or up to 14 products on 230 VAC. Never exceed this number. • The power-linking diagram corresponds to the North American version of the...
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Obsession may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes.
If you choose a starting address that is too high, the access to some of the product’s channels might get restricted. The Obsession uses up to 7 DMX channels in a 7CH DMX mode, which defines the highest configurable address to 506.
130 134 Red + green 135 139 White + red 140 197 Color wheel clockwise scroll, fast to slow 198 255 Color wheel counterclockwise scroll, slow to fast Obsession User Manual Rev. 1 Page 7 of 18...
The product will only respond to low frequencies of music (bass and drums). Master/Slave Mode The Master/Slave mode allows a single Obsession product (the “master”) to control the actions of one or more Obsession products (the “slaves”) without the need of a DMX controller or DMX cables. The master (transmitter) product should be set to operate in either standalone mode or with the IRC-6, whereas the slave (receiver) products should be set to operate in Slave mode.
Operation IRC-6 Infrared Remote Control The Obsession is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below: Press <MENU> repeatedly until SEt shows on the display. Press <ENTER>. Press <UP> or <DOWN> to select on or off.
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Obsession User Manual Rev. 1 Page 11 of 18...
0–20Hz 43° Thermal Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 7 channels Ordering Product Name Item Code UPC Number Obsession 01031570 781462219185 Page 12 of 18 Obsession User Manual Rev. 1...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Obsession User Manual Rev. 1 Page 13 of 14...
Voice: +52 (728) 690-2010 Visit the applicable website above to verify our contact information and instructions to request support. Outside U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of the record. Page 14 of 14 Obsession User Manual Rev. 1...