Editing: Effects; Basic Procedure For Effect Editing - Boss GX-100 Reference Manual

Editing: Effects

This section explains how to arrange the effects, how to edit individual effects, how to store them in memory after editing and so
on.

Basic Procedure for Effect Editing

Effect chain screen
The effect screen shows all of the effects used by the selected memory, as well as the output, send/return arrangement (effect
chain) and so on. You can edit by selecting the icon of the effect that you want to edit from the effect chain.
1. Touch <EFFECTS> in the upper left of the screen.
The effect chain screen is shown.
You can also bring this up by pressing the [EFFECTS] button on the top panel.
2. Touch the icon of the effect you want to edit.
The effect toggles on/off each time you touch the icon.
You can also toggle the effect on/off by pressing the [SELECT] knob.
3. Drag the respective parameters at the bottom of the screen to the left or right to change their values.
Use the PAGE [÷] [ø] buttons to switch between the parameters that you want to edit. The current page is indicated in the
lower center of the screen.
On
Editing: Effects
Off
23