Checking The Current Pad - Boss Dr.Sample SP-202 Owner's Manual

30
. .
By pressing an edit button, you can edit the sample that
is assigned to the blinking pad.
By holding down the REMAIN button and pressing a
pad 1-8, you can change the current pad without sound-
ing its sample. This
is
convenient when you wish to edit
during a performance.
The changed current pad will be treated as the last-
played note.
. .
'
: 2 :
,
....
I
I I I\
I I•
CURRENT
PAD
IREMAJNI ...
1. Press the REMAIN button.
The current pad will continue blinking while you hold
down the REMAIN button.
Settings for the current pad (the pad which last began play-
back) are shown in the display. If you have pressed two or
more pads to play samples, you can use the following proce-
dure to check which pad is the current pad.
I
Checking the current pad