Boss Dr.Sample SP-202 Owner's Manual page 2

2
• Immediately tum the power off, remove the AC
Ji'.
adaptor from the outlet, and request servicing by~
your dealer or qualified Roland service personnel
when:
• The AC adaptor or the power-supply cord has
been damaged; or
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally or
exhibits a marked change in performance.
• Do not allow any objects (e.g., flammable material,
K"\
coins, pins); or liquids of any kind (water, soft
\.Y
drinks, etc.) to penetrate the unit.
• This unit, either alone or in combination with an
K"\
amplifier and headphones or speakers, may be
\.Y
capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long
period of time at a high volume level, or at a level
that is uncomfortable.
If
you experience any hear-
ing loss or ringing in the ears, you should immedi-
ately stop using the unit, and consult an audiolo-
gist.
• Avoid damaging the power cord. Do not bend it
K"\
excessively, step on it, place heavy objects on it, etc.
\.Y
A damaged cord can easily become a shock or fire
hazard. Never use a power cord after it has been
damaged.
• Use only the specified AC adaptor (PSA-o
120/230/240), and make sure the line voltage at the
installation matches the input voltage specified on
Jr.
the AC adapter's body. Other AC adaptors may use~
a different polarity, or be designed for a different
voltage, so their use could result in damage, mal-
function, or electric shock.
• Make sure you always have the unit placed so
it
is
o
level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.
• Never use or store the unit in places that are:
,<;;\
• Subject to temperature extremes (e.g., direct sun-
'9'
light in an enclosed vehicle, near a heating duct,
on top of heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Humid; or are
• Dusty; or are
• Subject to high levels of vibration.
• Do
not attempt to repair the unit, or replace parts
f::'\
within it (except when this manual provides specif-
\.Y
ic instructions directing you to do so). Refer all ser-
vicing to your dealer, or qualified Roland service
personnel.
• Do not open (or modify in any way) the unit or its
Ni\
AC adaptor.
\lY
• Before using this unit, make sure to read the
Jr.
instructions below, and the Owner's Manual. ~
&WARNING
&
WARNING
-- - - - - - - - -- - - - -- ------ -- - ------ --- ---- ALWAYS OBSERVE THE FOLLOWING ---- - - - -- - - - - -- --- - - · --- - - - ---- --- - - - - - -
The!::.. symbol alerts the user to important instructions
Lt
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle.
In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The
0
symbol alerts the user to items that must never
be
carried out (are forbidden). The specific thing that
©
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
The
e
symbol alerts the user to things that must be
carried out. The specific thing that must be done is
Gt
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
Used for instructions intended to alert
&,WARNING
the user to the risk of death or severe
injury should the unit be used
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
&.CAUTION
improperly.
" Material damage refers to damage or
other adverse effects caused with
respect
to
the home and all its
furnishings, as well to domestic
animals or pets.
About the Symbols
INSTRUCTIONS FOR THE PREVENTION OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
About
&
WARNING and
&
CAUTION Notices
USING THE UNIT SAFELY