Electrolux EVEP916 Installation & User Manual page 14

14 electrolux.com.au
USING THE OVEN
the food. This combination will heat up your oven 30%
quicker than it would on standard "Bake". The oven will
automatically revert to the set cooking function once the
preset temperature is reached.
Function selector model with Rapid Heat (EFE914)
To preheat your oven select the "Rapid Heat" function.
This function allows your oven to reach the preset
temperature quicker than any other cooking function.
1 Turn the function selector to "Rapid Heat".
2 Set the desired preheat temperature, by rotating
your oven temperature selector. When the indicator
light above the temperature selector goes out, the
oven has reached the desired temperature. Select
the oven function you require for cooking or baking
and place the food in the oven.
Cooling / Vent fan
The appliance is fitted with a cooling fan. This prevents
the kitchen cabinet from overheating and reduces the
condensation inside the oven. It will operate whenever
the oven is in use and blow warm air across the top of
the oven door.
NOTE: If the oven is still hot from cooking, the cooling fan
will keep running to cool the oven down and will switch
off by itself once cool.
Condensation
Excess condensation may fog the oven door. This may
happen when cooking large quantities of food from a
cold start. Minimise condensation by:
• Keeping the amount of water used whilst cooking
to a minimum.
• Making sure the oven door is firmly closed.
• Baking custard in a baking dish that is slightly
smaller than the water container.
• Cooking casseroles with the lid on.
NOTE: If using water in cooking, this will turn to steam
and may condense outside your appliance. This is not
a problem or fault with your oven.
(CONTINUED)
Operating the touch control clock models EFE914
General features
Your touch control clock has the following features:
• Timer – allows you to set a countdown time that
will beep when the set time has elapsed.
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
• End cooking time – you can set a cooking finish
time. A timer will count down the preset cooking time,
beep when the finish time has been reached and turn
the oven off.
• Delayed start cooking time – You can combine
the cooking time and stop cooking time to switch the
oven on and off at a specific time during the day.
NOTE: Your touch control clock only operates with
your main oven.
Setting the time of day
You must set the time of day before you can operate your
appliance. When power is supplied to your oven "12.00"
will be displayed and the "clock" indicator I will flash.
1 To set the time of day in hours and minutes, press
or . 5 seconds after the last change, the "clock"
indicator I will disappear, confirming the time has
been set.
NOTE: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1 Press until the "clock" indicator I
begins flashing.
2 Press or to change the time. 5 seconds
after the last change, the "clock" indicator I will
disappear, confirming the time has been set.