Electrolux EVEP916 Installation & User Manual page 54

54 electrolux.com.au
INSTALLATION OF EFE914, EFEP916 & EFEP956
WARNING
Appropriate fasteners must be used to suit the type of wall on which the anti-tilt brackets are installed.
4 The anti-tilt brackets must be secured to the rear wall of the cavity
with appropriate fastener according to dimensions in diagram.
Connect services to the appliance prior to placing
into cavity.
To locate appliance, slide into cavity ensuring the
anti-tilt brackets fully engaged with the rear left and
right engagement slots.
The unit must be pushed against the wall on installation.
Re-install oven door, burner body, burner caps and
trivets after the appliance is placed in the cavity.
Gas only: Check that the gas hose, if used, has not
been kinked during installation.
Anti-tilt bracket
installation
reference line
Install anti-tilt brackets
in this orientation as
shown.
(Fasteners not supplied)
(CONTINUED)
C
L
370
370
Installing the clip-on kick panel
Freestanding models are supplied with a clip-on kick panel
that can be assembled to clip onto the front feet for a more
integrated and seamless kitchen appearance.
Clip base
Clip snap