Electrolux EVEP916 Installation & User Manual page 21

USING THE FOOD PROBE
Fish
For best results, place the whole fish onto the wire rack
and prop it up in the swimming position (i.e. using half a
potato or onion). Alternatively the fish can be laid flat.
Insert the Food Probe behind the head with at least 75%
of the probe inserted into the fish towards the bones in
the middle of the fish.
Poultry
Place the whole poultry on the wire rack breast side up.
Insert the Food Probe with at least 75% of the probe into
the breast of the poultry. Place the probe in a direction
toward the neck end of the poultry.
CAUTION
To prevent the Food Probe from being damaged
by excessive heat, there must be a gap of a few
centimetres between the grill element and the
Food Probe. The meat may expand during the
cooking process.
(CONTINUED)
5 Put the plug of the Food Probe into the socket
on the top right hand corner of the front frame.
Ensure plug is fully inserted into the socket.
CAUTION
After pre-heating, the front of the oven will be
hot. Care should be taken when inserting the
food probe plug.
NOTE: The Food Probe will only
work for the following functions:
• Fan cooking
• Traditional bake
• Fan assist bake
• Roast
If you have selected a function that is not compatible
with the Food Probe, you will see the message
"REMOVE FOOD PROBE".
6 Set the desired food core temperature by
pressing the temperature
to reach the desired setting.
To change the desired food core temperature during
cooking, press and hold the
time. To cancel the Food Probe operation, simply
unplug the probe from the socket.
21
or temperature
and at the same