Using The Food Probe - Electrolux EVEP916 Installation & User Manual

20 electrolux.com.au
USING THE FOOD PROBE (EVEP916, EFEP916, EFEP956)
The Food Probe measures the core temperature of
the food. When the food reaches the desired set core
temperature, the oven turns off. The Food Probe has
a core temperature range of 50 – 99°C.
There are two temperatures to set:
• The oven temperature
• The core temperature of the food
WARNING!
Only use the Food Probe supplied or the correct
replacement parts.
CAUTION
Always check if food is cooked throughout
before eating.
WARNING!
After use, always remove the Food Probe from
the oven cavity.
WARNING!
The food probe is hot. There is a risk of burns.
Be careful when you remove the tip and plug of
the Food Probe.
NOTE: Food must be completely defrosted when inserting
the Food Probe. If the food is too cold, the Food Probe
function will not work.

Using the Food probe:

1 Switch on the oven by touching the
2 Select a cooking function by pressing the
function or
until the desired function appears.
NOTE: When using the Food Probe, the duration
and end time functions do not operate.
3 Select the oven temperature by pressing the
temperature
desired setting. Allow oven to preheat.
4 Put the tip of the Food Probe into the centre
of the food, with at least 75% of the probe inserted
into the food.
Meat
For large pieces of meat, insert the tip of the Food Probe
into the centre of the meat, with at least 75% of the probe
inserted into the meat.
symbol.
function as many times as necessary
or temperature to reach the