Configuring Dhcpv4 Relay - ZyXEL Communications XS3800-28 User Manual

Figure 45 Tutorial: Add Tag for Frames Received on Port 2
11 Click the Save link in the upper right corner of the web configurator to save your configuration
permanently.

6.3.3 Configuring DHCPv4 Relay

Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent
information (such as the VLAN ID) to DHCP requests.
Click IP Application > DHCP > DHCPv4 and then the Global link to open the DHCP Relay screen.
1
Select the Active check box.
2
Enter the DHCP server's IP address (192.168.2.3 in this example) in the Remote DHCP Server 1 field.
3
Select default1 or default2 in the Option 82 Profile field.
4
Click Apply to save your changes back to the run-time memory.
5
Figure 46 Tutorial: Set DHCP Server and Relay Information
Click the Save link in the upper right corner of the web configurator to save your configuration
6
permanently.
The DHCP server can then assign a specific IP address based on the DHCP request.
7
Chapter 6 Tutorials
XS3800-28 User's Guide
69