Other Features - Opticon OPN-2001 Quick Start Manual

Notepad, etc).

Other Features

The newest revision of this firmware added some functionality. Users can now choose to transmit
time stamps, and barcode IDs (barcode symbology). They can also switch between a "return" suffix,
and a "tab" suffix.
If you would like to time stamp your barcode scans, or transmit the Barcode symbology(Code
ID), you can do this by following the procedure below
1. Print the barcode sheet at
2. To enable or disable either the time stamp or transmission of the barcode ID, scan the SET
barcode, then the Enable or Disable barcode for either option, then the END barcode. These
options are disabled by default.
By default, the OPN-2001 transmits an "Enter" key press after every barcode. To change this to a
tab, or to change back to return, print this
Codes" barcode, followed by either the "Enter" or the "Tab" barcode, and finally END.
Development
SDK for OPN200x Host Applications
There are currently APIs for developing applications to communicate with the OPN2001 on/with the
following platforms/technologies: Windows XP / Vista / 7 (32 and 64 bit) ActiveX .NET Mac OS X The
OPN PC SDK
interface with the OPN-2001, OPN2003, or OPN2004. Sample code and documentation are included,
however compilers are not included. Please use a compiler appropriate for the operating system you
are developing for: Windows, or Macintosh OS X.
OS Change Log
RBBV0106: First official release
RBBV0107: Fix USB problems : "Set configuration" command with value 0 not handled correctly,
sometimes OPN2001 returns a STALL response when PC tries to send data.
RBBV0108: Fix : after connecting scanner to PC scanner thinks that it received much data, after
sending "EX" command in factory mode, scanner does not reset itself. Implement watchdog timer.
RBBV0109: Fix : crashes during Flash write/erase actions due to enabled interrupts.
RBBV0110: Fix : In factory mode scanner cannot exit laser adjustment mode anymore.
RBBV0111: Fix : Code 39 CD was not transmitted by default, software did not work on older
OPN2001 models.
RBBV0112: Fix : Scanner reset when transmitting a large amount of data (Watchdog)
RBBV0113: Scan barcodes, while connected to the PC.
RBBV0114: Clear data with special barcode
RBBV0115: Add support for decoding RSS-14, RSS Limited, and RSS Expanded bar codes.
RBBV0116: Fix telepen numeric bug '00' and Code 128 checksum bug '00'
7 sur 13
this link
contains nearly everything you would need to develop your own host application to
.
barcode sheet and scan SET, then the "Suffix for All
18/04/2018 à 15:13