Regulatory Compliance; Led Safety; Emc; Rohs - Opticon M-10 Specification Manual

11. Regulatory Compliance

11.1. LED Safety

IEC 62471-1:2006 Exempt Risk Group

11.2. EMC

EN55022
EN55024
FCC Part 15 Subpart B Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept
any interference received, including interference that may cause undesired operation.
VCCI Class B
This is a Class B product, to be used in a domestic environment, based on the Technical
Requirement of the Voluntary Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it
may cause radio interference.

12. RoHS

The M-10 is compliant with RoHS.
RoHS: The restriction of the use of certain hazardous substances in electrical and electronic
equipment, 2011/65/EU

13. Reliability

MTBF (Mean Time Between Failures)
Note: The reliability of the M-10 is guaranteed as far as it is operated under normal operating conditions in the
range of advised operating temperature and without excessive electrical or mechanical shock.

14. Precautions

Handle this product carefully. Do not deliberately subject it to any of the following.

14.1. Shock

• Do not throw or drop the scanner outside the specified height.
• Do not place heavy objects on the cables.

14.2. Temperature Conditions

• Do not use the scanner at temperatures outside the specified range.
• Do not pour boiling water on the scanner.
• Do not forcibly bend the cables at low temperatures.

14.3. Foreign Materials

• Do not subject the scanner to chemicals.

14.4. Other

• Do not disassemble this product.
• Do not place the product near a radio or a TV receiver, as the scanner may cause reception
problems.
• The scanner may be damaged by voltage drops.
50,000 hours
23
M-10
Specifications Manual