Toshiba TE2 Series Instruction Manual page 62

TE2 Series Digital Solid State Soft Starter User Manual
5.6.9.c Timer Value Readouts for Protection Features
F054 - F059 provide display of timer or register values for information
only. The user cannot alter them. Upon power loss and restoration,
these values are updated for time elapsed.
F054 = Restart Delay Time Readout
Factory Setting = Not Applicable
Range = 1 - 999 Seconds
Remaining time value readout of F028, the Auto-Restart Delay
Timer.
F055 = Coast Down (Backspin) Timer Value
Factory Setting = Not Applicable
Range = 1 - 3600 Seconds
Remaining time value readout of F048, the Coast Down
Lockout Timer.
F056 = Starts per Hour Timer Value
Factory Setting = Not Applicable
Range = 1 - 3600 Seconds
Remaining time value readout of F049, the Starts-per-Hour
Lockout Timer.
F057 = Starts per Hour Counter Readout
Factory Setting = Not Applicable
Range = 1 - 10 Starts
Incremental counter value readout of F050, the Starts-per-Hour
Lockout.
F058 = Time Value Between Starts Readout
Factory Setting = Not Applicable
Range = 1 - 3600 Seconds
Remaining time value readout of F050, the Minimum Time
Between Starts Timer.
F059 = Thermal Capacity to Start Readout
Factory Setting = Not Applicable
Range = 0 - 100 % Thermal Capacity
Readout only for the user's viewing of the motor Thermal
Capacity percentage required to allow a Reset after an
Overload Trip. Use this function in conjunction with the
Remaining Thermal Capacity (in the Status Screen group) to be
able to determine when a restart will be allowed. This value is
automatically updated by the TE2 Series CPU whenever a
successful start sequence has been accomplished. The TE2
Series essentially "learns" how much Thermal Capacity is
needed in the motor in order to successfully restart, and stores
the information in this Function. Upon power loss and
restoration, this value is updated for elapsed time.
53 | P a g e