The Te2 Function List - Toshiba TE2 Series Instruction Manual

Fn # Group Function Description
Motor Nameplate FLA
F001
FLA must be programmed for
starter to function.
Motor Nameplate
F002
Service Factor
F003 Overload Class During Start
F004 Overload Class During Run
F005 Overload Reset
F006
- Reserved for factory use
F009
Table 5.5.1: Motor and Overload Function Group
Fn # Group Function Description
Ramp Type Selection:
F010 VR = Voltage Ramp
CR = Current PID Ramp
1 = Ramp 1, 2 = Ramp 2
F011 Initial Torque (VR) of Ramp 1
F012 Initial Torque (CR) of Ramp 1
F013 Accel Ramp Time of Ramp 1
F014 Max Current Limit of Ramp 1
F015 Initial Torque (VR) of Ramp 2
F016 Initial Torque (CR) of Ramp 2
F017 Accel Ramp Time of Ramp 2
F018 Max Current Limit of Ramp 2
Table 5.5.2: Starting Mode Function Group
TE2 Series Digital Solid State Soft Starter User Manual
5.5

The TE2 Function List

5.5.1 Motor FLA, Service Factor and Overload Protection
Functions
Adjustment / Display Range
50 -100% of Max Amp Rating.
Upper limit of range automatically
adjusts downward as Service factor
is increased.
1.00 - 1.30 SF
NEMA / UL Class 5 -30
NEMA / UL Class 5 - 30
0 = Manual
1 = Auto
2 = Disabled Overload
5.5.2 Starting Mode Functions
Adjustment / Display Range
Setting 1 = VR1 + VR2
Setting 2 = CR1 + CR2
Setting 3 = VR1 + CR2
Setting 4 = CR1 + VR2
0 - 100% Line Voltage
0 - 600% Motor Current
1 - 120 seconds
200 - 600% Motor Current
0 - 100% Line Voltage
0 - 600% Motor Current
1 - 120 seconds
200 - 600% Motor Current
Setting Factory
Increments Setting
1 amp 0
0.05 1.0 SF
5 Class 10
5 Class 10
0
1
(Manual)
Setting Factory
Increments Setting
1
1
VR1+VR2
1% 60%
1% 200%
10
1 second
seconds
1% 350%
1% 60%
1% 200%
10
1 second
seconds
1% 350%
30 | P a g e
Section
5.6.1
and
3.2
Section
5.6.2
and
Append.
1
5.6.2,
Append.
1
and
4.2.5