Label, Nameplate Introduction; Nameplate; Label - Elephant Robotics Panda Series User Manual

equipment, the main power switch must be turned off to perform maintenance work.
No items should be stacked in the robot working area, and no debris should be placed
10
in the control box.
After the operation is completed, the safety protection door should be closed
11 immediately, and the various switches of gas and electricity should be closed
according to the procedure, and the work site should be cleaned up.
12 Do not shake the robot and hang heavy objects on the robot.
13 No dangerous behaviors or games around the robot.
After installing the robot, make sure the robot is fixed on a stable surface for
14
subsequent operations.
15 Make sure that the robot does not collide with itself or other objects during running.
16 If the robot is damaged, do not continue to use it.
Please use the robot within the robot's parameter range and service life, otherwise it
17
will cause serious safety problems.
After the emergency stop state is canceled, and before the servo power is turned on, it
18 is necessary to remove the obstacles and faults that cause the emergency stop, and
then turn on the servo power.
Please pay attention to the rotating shaft of the robot to prevent the cable and the air
19 tube from being entangled. Keep a distance from the shaft to prevent hair or clothing
from getting entangled.

1.5 Label, nameplate introduction

1.5.1 Nameplate

There are two types of nameplates used in the robot system. The robot
body and power box have different nameplates. The nameplate records some
basic information about the product. It should be noted that the production
number on the nameplate is unique. That is to say, each product has a unique ID,
which is an important basis for distinguishing each product, and is also
important information to be provided when applying for maintenance.

1.5.2 Label

Robots are high-precision equipment, and they are more dangerous than
ordinary machines when they are unfamiliar or not in accordance with the
manual. As shown in Figure 1-1, the labels are attached to the power box to
remind the operator to read the relevant operating manual before use.
Shenzhen Elephant Robotics Technology Co., Ltd.
7