OAKWORKS Spine Positioning System Instruction Manual page 14

directions for use
Warning
patIent - lIz
components used: Platform Frame (1), Crescent Face Cushion (1), Contoured Torso Support Pad (1),
Small Contoured Torso Wedge (1), 7" x 12" Rectangular Adjuster Pad (1), 8" x 16" Rectangular Adjuster Pad (1),
8" Semi-Round Bolster (1)
Liz
Configuration of the SPS for positioning Liz.
AP image visualizing the T1-2
interlaminar space.
A patient safety strap must be used for all procedures.
See warnings on page 2.
Liz in the SPS while obtaining an AP
image of the upper thoracic spine.
Lateral image primarily through the
C7—T2 segments.
12
Liz in the SPS while obtaining a
lateral image of the upper thoracic
spine.
optIonal set up:
Platform Frame (1), Crescent Face Cushion (1)
Contoured Torso Support Pad (1), Large
Contoured Torso Wedge (1), 8" Semi-Round
Bolster (1)
Contralateral oblique showing the
upper thoracic facet joints.