Basic Operation Settings; Domestic Hot Water Setpoint Temperature - Rinnai I Series Installation And Operation Manual

To adjust the DHW setpoint temperature, follow the steps below.
20
Pri.
If the LED above the DHW button is
not illuminated, press the DHW
button.
If the LED above the DHW button is
illuminated, proceed to Step 2.
°F
104
Pri.
Adjust the temperature with
the Up and Down arrows until
the appropriate temperature is
displayed.
Rinnai I-Series Condensing Boiler Combi Manual
PSI
LED
20
Pri. PSI
Press the Switch Operation
Mode button until the DHW
Active icon appears on the
home screen.
°F
120
Pri.
Press the Select button to confirm
the temperature.
This temperature setting is
displayed for a few seconds and
then returns to standby mode.
73